What Does a Metal Roof Cost in 2026?
Prices swing widely by material, region and how complicated your roof is. Use the calculator below to get an instant, ballpark estimate for your project.
MetalRoofBasics Editors · Updated Jul 2026 · 7 min read 
Most homeowners pay $18,000–$40,000 for a metal roof on an average 2,000 sq ft home — roughly $5–$40 per square foot depending on the material. Region, roof pitch and complexity can each swing the total by 10–20%.
Cost estimator
Pick a material, your region, your roof size, and any factors that add complexity. The estimate updates instantly — nothing is sent anywhere.
Not sure? A typical single-story 2,000 sq ft home has roughly 2,000–2,400 sq ft of roof area.
$10.00–$16.00/sq ft · Standing Seam · Midwest · 2,000 sq ft · no complexity factors
Estimate only — actual quotes vary by contractor, exact material grade and site conditions. Always get 3 written quotes.
Typical cost by material
Installed price ranges, national average, before regional adjustment or complexity factors. Totals assume a 2,000 sq ft roof.
| Material | $ / sq ft | 2,000 sq ft roof |
|---|---|---|
| Corrugated / Exposed-Fastener Steel | $5–$9 | $10,000–$18,000 |
| Metal Shingles & Shakes | $8–$13 | $16,000–$26,000 |
| Metal Tile Panels | $8–$13 | $16,000–$26,000 |
| Stone-Coated Steel | $9–$14 | $18,000–$28,000 |
| Standing Seam | $10–$16 | $20,000–$32,000 |
| Copper & Zinc (Premium) | $20–$40 | $40,000–$80,000 |
What drives the price
Corrugated steel is the budget option; standing seam and copper/zinc sit at the top.
Local labor rates shift quotes 10–15% above or below the national average.
Steep, cut-up roofs with valleys and dormers cost more to detail and take longer.
Removing old layers, disposal, and hard-to-reach roofs all add labor.
Regional resources
National averages only get you so far — local labor rates and building codes set the real number. If you're in one of these markets, these regional roofing sites can help you price a metal roof for your area.
Metal roofing for Charlotte and the Mecklenburg County area.
Metal roofing for Houston and the Greater Houston suburbs.
Metal roofing for Greensboro and the Piedmont Triad.
Metal roofing across the Northern Virginia suburbs of DC.
- Material choice swings price the most — corrugated steel to copper/zinc spans 5–40 $/sq ft.
- Region typically adjusts the total by ±10–15%.
- Pitch, layout complexity, tear-off and access can each add 6–15% more.
- Use this calculator for a ballpark, then get 3 written quotes to compare real numbers.
Want the questions to ask a contractor?
Free checklist and cost-comparison worksheet — no signup.